Gurdwara Tapoban SahibBrampton

ਪ੍ਰਥਮਰਹਿਤਯਹਿਜਾਨਖੰਡੇਕੀਪਾਹੁਲਛਕੇ॥ ਸੋਈਸਿੰਘਪ੍ਰਧਾਨਅਵਰਨਪਾਹੁਲਜੋਲਏ॥

Forum

what is sarbloh

what is sarbloh

cybersingh · 05 Jul 2005

What is the composition of what we all consider 'sarbloh'. is it 100% iron? from what i know, 100% iron is not possible. then what constitutes sarbloh? im hoping to hear from Kulbir Singh ji on this one.

Re: what is sarbloh

cybersingh · 06 Jul 2005

helooooooo?

Re: what is sarbloh

> · 07 Jul 2005

sarbloh is low carbon steel. It will rust.

Re: what is sarbloh

kar kirpaa sabh rayN thheevaa · 07 Jul 2005

what is the difference between "carbon steel" and "cast iron" ?

Re: what is sarbloh

cybersingh · 07 Jul 2005

low carbon steel? did you know good quality carbon steel nives have still 90+% iron in them...would that be considered sarbloh.... this is an important issue because ppl are so dedicated to sarbloh without really knowing wat it is. [even i don' t know]. so WHAT IS SARBLOH!?

Re: what is sarbloh

singh · 07 Jul 2005

I know what sarbloh is when I look at/handle it but sadly I don't know the actual chemical composition. I'm assuming it would actually have a higher carbon content since it is more brittle?

Re: what is sarbloh

cybersingh · 07 Jul 2005

actually from my understanding, the higher the carbon content the STRONGER the blade....so i think the most brittle would be pure iron. also, ive heard that what most ppl considder sarbloh is actually 'pig iron' which is low quality, easily damaged impure iron. so far no one has given a sufficient answer as to what exactly sarbloh is...:S

Re: what is sarbloh

Hari Singh · 07 Jul 2005

Sarbloh in itself is Carbon Steel as stated above. The method of creating this carbon steel was not the method that is used today. Therefore if you are asking for a percentage of carbon content that is required then I'm afraid that is not available though I'm sure we can come up with a reasonable range. Singhs seem to have no issue with the quality of the batay that are commonly available. If your concerned about the carbon content of the sarbloh stuff you have then don't be overly so. As long as it is classified as a carbon steel and its rusts and doesn't have any metals such as nickle etc. mixed into it or their isn't any sort of plating then its okay. Some of the battay I have are really well made because the iron was "beaten" and though I'm not sure how this effects the formation of dendrites the battay maintain a natural shine for a longer time then some of the oter stuff that I have.

Re: what is sarbloh

kar kirpaa sabh rayN thheevaa · 07 Jul 2005

what is the difference between cast iron and carbon steel? how come some people say cast iron is sarbloh?

Re: what is sarbloh

singh · 08 Jul 2005

im not convinced sarbloh is carbon steel - army knives use carbon steel blades they do rust slowly but they are VERY VERY hard...but with normal sarbloh it chips easily and its quite soft..maybe it has alot of impurities in it?

Re: what is sarbloh

gora · 14 Jul 2005

Stumbled across this thread, so hope I don't offend. There seams to be confusion over the metalurgical term hard. A hard metal will resist indentation, but the trade off for this is that it will be brittle and chip. Hi carbon steel tends to be hard. A good blade also needs to be tough, in that it has an elastic strength which would resist fracture and recovers from bending. However, the composition is only part of the answer. How you heat treat the metal will affect both hardness and toughness. A high carbon steel has less than 1.5% carbon and tends to be hard and brittle. A low carbon steel or pig iron (pig iron actually refers to the way mild steel is cast in ingots), has less than 0.1% carbon. I believe the important aspect for sarbloh is that is doesn't contain chrome, vanadium, nickel or other elements which would resist corrosion. If you are eating off sarbloh, any taint of poison will be declared by discolouration of the clean metal.